Application instructions

• Stir well before use.
• EPOVARNISH 040 contains solvents.
• During application in enclosed areas good ventilation is required.
• Component B is completely added to A and mixed for at least 5 minutes until the mixture is completely homogenized.
• Apply with a brush, roller or pistol within 24 hours of applying the primer after it has dried.
• The second coat is applied after the first one has dried, but within 24 hours.
• Adhesion between the layers may be affected by the presence of moisture or dirt.
• If there is a waiting time between the consecutive layers longer than expected or if old surfaces are to be dyed again, the surface must be cleaned and ground thoroughly before the new application.
• The application temperature should not be below 10°C and the humidity should not exceed 75% RH.
• After application the surfaces must be protected from moisture for 6-8 hours as moisture can give white tinge on the surface and/or make it sticky.
• After its hardness, EPOVARNISH 040 is harmless to health.

Cement substrates

• The quality of the concrete must be at least C20/25 with a cement content of 350kg/m3, moisture content <4% and application must be carried out at least 30 days after construction of the surface.
• The priming is done with the EPOPRIMER 240 of TETRALUX diluted 10-15% by weight or with EPOVARNISH 040 itself diluted 40-60 wt% with solvent No810 by Tetralux.

Metallic Surfaces

• Good surface cleaning is required and brushing, sand blasting, milling, etc. are required depending on the surface.