Set 3l, 18l
Acrylux PU 550 Acrylic, aliphatic polyurethane paint
ACRYLUX PU 550 is a two-component, acrylic, aliphatic polyurethane paint.
It is recommended for use on interior and exterior primed metal surfaces exposed to moderate to highly corrosive environments. It can be used as a topcoat in various anti-corrosion systems for protection according to ISO EN 12944, C2 Very High to C4 Low. It has very good gloss and color retention as well as resistance to exposure.
Surfaces must be clean, dry and free from oil and other deposits that will prevent or affect adhesion.
Before applying the substrate: surfaces must be assessed and treated accordingly, sandblasting to Sa2½ (EN ISO 8501-1:2007) is recommended, while surfaces to be prepared by hand should be prepared to a minimum of St3 (EN ISO 8501-1:2007) at the time of application.
For DFT 40-60μm, the application is done in one coat. Its composition allows the intended thickness to be achieved in one coat without running during application.
Download Technical Specification Document from here
Material Safety Data Sheet is provided upon request. Apply here
5-15% with thinners No. 850, 851
Brush

Roller

Spray gun

9 -10 m²/l
30 minutes
Frequently asked questions
What is Acrylux PU 550 used for?
Acrylux PU 550 is a aliphatic polyurethane paint designed for finishing steel structures. Before application, make sure the surface is properly prepared and check the Technical Data Sheet or ask Tetralux technical support to choose the right system.
What is the coverage of Acrylux PU 550?
Acrylux PU 550 covers 9 -10 m²/l. Actual consumption depends on the porosity, texture and preparation of the surface. For an accurate estimate, use the Tetralux paint calculator or ask our technical team.
How long does Acrylux PU 550 take to dry?
Drying time is 30 minutes at around 20-25°C and normal humidity. In cold or damp conditions it takes longer, so let the surface dry properly before applying the next coat or putting it into use.
How should Acrylux PU 550 be thinned?
Recommended dilution: 5-15% with thinners No. 850, 851. Stir the product well before and after thinning and do not exceed the suggested ratio, so that coverage, adhesion and the durability of the final film are not compromised.
Which tools are used to apply Acrylux PU 550?
Acrylux PU 550 is applied with brush, roller and spray gun. Make sure the surface is clean, dry and sound before you start, and follow the Technical Data Sheet for the number of coats and the right primer.
Which pack sizes are available for Acrylux PU 550?
Acrylux PU 550 is available in Set 3l, 18l packs. You can find it at Tetralux stockists, and for professional quantities or technical support you can contact the company directly.
Sign up to receive the latest updates on our products, events and news.
