Cemento

Application method: Roller, brush or glove and stainless steel spatula.

Application: 1st layer: On a primed surface, apply a layer of CEMENTO, leaving enough product on the surface, with a roller, brush or glove. After that and before the paint dries, level the entire surface with a stainless steel spatula with irregular movements.
After about 5 minutes, repeat the same process with the spatula and level the surface.

2nd layer: After completely drying and at least after 4 hours, apply another layer of CEMENTO in the same way and repeat the same procedure with the spatula. After about 5 minutes, repeat the same process with the spatula and level the surface.
When the paint begins to dry, press the spatula over the whole surface once or twice in order to polish it and appear the effect. The more you press, the more intense the effect will be.

Extra protection with wax: For extra protection and glossy effect, apply a layer of Cera Veneziano wax with a sponge and after it dries, polish with a cotton cloth or polisher. The surface you have waxed with CERA Veneziano is shiny and completely waterproof while the other is matt and absorbent.

Coverage: About 8 m2/l per layer on prepared surfaces.

Remarks:
• Wash your equipment immediately after the application, with water and soap (if it is necessary).
• Avoid the product application if the ambient and surface temperature is below 5oC or above 35oC.