Epolux SL 542 Solvent free epoxy paint for floors

The surface must be dry, clean, stable, free from materials that prevent adhesion, such as dust, loose materials, grease etc. and protected against rising humidity.

The following specifications must be kept:

Concrete quality: at least C20/25,Floor mortar quality: cement content at 350 Kg/m3,Aging: at least 28 days,Substrate humidity content < 4%

Depending on the nature of the substrate, appropriate pre-treatment should be performed, such as brushing, grinding, sandblasting, water blasting, shot blasting, etc. Then, the surface should be cleaned from dust with a high suction vacuum cleaner.

Application

On cementious surface priming must be applicated using EPOPRIMER SOL 242 in one layer by roller or brush.
After priming application plastering must be administered locally with a mix of EPOLUX SL 542 and quartz sand M-32, in proportions of 1:2 to 1:3 per weight.
EPOLUX SL 542 application must be done within 24 hours from the time primer is administered in one or two layers.
On stable, non-absorbent surface, apply EPOLUX SL 542 directly in one or two layers.