Σετ: 1l, 3l,15l
Epoprimer 240 Epoxy Solvent Based Primer (renaming of Epolux 125)
Epoprimer 240 of TETRALUX is ready to mix, solvent based, epoxy system of two components.
It exhibits high endurance and friction resistance.
It has excellent resistance to sea water, oxides, alkalis, hydrocarbons, oil and oil fractions.
It is used for impregnation of substrates and as a primer for EPOLUX 540 of TETRALUX.
Drying; Repainting within 24 hours, surface drying in 24 hours, final hardening in a week.
- Stir well before use
- Surfaces must be clean, dry and free from foreign objects and substances.
Surface preparation
- The quality of the concrete must be at least C20 / 25 with a cement content of 350 kg / m3, moisture content <4% and application must be carried out at least 30 days after the construction of the surface.
- Good surface cleaning is required and brushing, sand blasting, milling, etc. are required depending on the surface.
Application
- EPOPRIMER 240 contains solvents.
- During application in enclosed areas good ventilation is required.
- Component B is completely added to A and mixed for at least 5 minutes until the mixture is completely homogenized.
- Dilute 5 – 20% with solvent Νο 810, depending on the absorbency of the substrate.
- Temperature should not be below 10°C and the humidity should not exceed 75% RH.
- Adhesion between the layers may be affected by the presence of moisture or dirt.
- Application of final coat of EPOLUX 540 must be done within 24 hours and after the primer has dried.
- If more than 24 hours have passed between priming and application of the final layer, the surface must be spread up with quartz sand in order to ensure good adhesion.
- EPOPRIMER 240 is harmless to health after its complete hardening.
- After application the surfaces must be protected from moisture for 6-8 hours as moisture can give white tinge on the surface and/or make it sticky.
Download Technical Specification Document from here
Material Safety Data Sheet is provided upon request. Apply here
5 - 20% with solvent No 810
Brush

Roller

Spray gun

7 - 9 m²/l
Frequently asked questions
What is Epoprimer 240 used for?
Epoprimer 240 is a clear solvent epoxy primer designed for priming floors before epoxy. Before application, make sure the surface is properly prepared and check the Technical Data Sheet or ask Tetralux technical support to choose the right system.
What is the coverage of Epoprimer 240?
Epoprimer 240 covers 7 - 9 m²/l. Actual consumption depends on the porosity, texture and preparation of the surface. For an accurate estimate, use the Tetralux paint calculator or ask our technical team.
How should Epoprimer 240 be thinned?
Recommended dilution: 5 - 20% with solvent No 810. Stir the product well before and after thinning and do not exceed the suggested ratio, so that coverage, adhesion and the durability of the final film are not compromised.
Which tools are used to apply Epoprimer 240?
Epoprimer 240 is applied with brush, roller and spray gun. Make sure the surface is clean, dry and sound before you start, and follow the Technical Data Sheet for the number of coats and the right primer.
Which pack sizes are available for Epoprimer 240?
Epoprimer 240 is available in Σετ: 1l, 3l,15l packs. You can find it at Tetralux stockists, and for professional quantities or technical support you can contact the company directly.
Related products
Sign up to receive the latest updates on our products, events and news.
