Alkyd polyurethane paint Alkydlux PU 552

Alkydlux PU 552 Alkyd-based polyurethane paint

ALKYDLUX PU 552 is a two-component, alkyd-based polyurethane paint with very high gloss and durability.

Polyurethane finishing coating for interior and exterior surfaces. It is suitable for metallic constructions which exposed to various types of corrosive environments, for agricultural machineries, earth moving machineries, truck chassis-trailers etc. It has very good gloss and colour retention as well as great resistance to exposure.

Application Instructions

Surfaces must be clean, dry and free of oily substances and deposits of other materials which will prevent or affect adhesion. Prior to application, surfaces must be assessed and treated accordingly.

For metallic constructions: Sandblasting to Sa2½ level (EN ISO 8501-1:2007) is recommended, while for surfaces to be prepared by hand they should be prepared to a minimum St3 level (EN ISO 8501-1:2007) at the time of painting. Apply in one layer.

For agricultural machineries, earth moving machineries etc: Cleaning of the surface with solvent and oxidized areas with electric or manual sander and suitable abrasive mean is recommended. Apply in one layer.

Download Technical Specification Document from here

Material Safety Data Sheet is provided upon request. Apply here

Brush

Roller

Spray gun

Frequently asked questions

What is Alkydlux PU 552 used for?

Alkydlux PU 552 is a alkyd polyurethane paint designed for high-gloss metal surfaces. Before application, make sure the surface is properly prepared and check the Technical Data Sheet or ask Tetralux technical support to choose the right system.

What is the coverage of Alkydlux PU 552?

Alkydlux PU 552 covers 9 -10 m²/l. Actual consumption depends on the porosity, texture and preparation of the surface. For an accurate estimate, use the Tetralux paint calculator or ask our technical team.

How long does Alkydlux PU 552 take to dry?

Drying time is 45 minutes at around 20-25°C and normal humidity. In cold or damp conditions it takes longer, so let the surface dry properly before applying the next coat or putting it into use.

How should Alkydlux PU 552 be thinned?

Recommended dilution: 15-20% w/w with solvent No 806 for air spray and 10-15% w/w with solvent No 806 for brush, roller and airless spray. Stir the product well before and after thinning and do not exceed the suggested ratio, so that coverage, adhesion and the durability of the final film are not compromised.

Which tools are used to apply Alkydlux PU 552?

Alkydlux PU 552 is applied with brush, roller and spray gun. Make sure the surface is clean, dry and sound before you start, and follow the Technical Data Sheet for the number of coats and the right primer.

Which pack sizes are available for Alkydlux PU 552?

Alkydlux PU 552 is available in Set 3l, set 18l packs. You can find it at Tetralux stockists, and for professional quantities or technical support you can contact the company directly.

Alkydlux PU 552 Alkyd-based polyurethane paint