Exterior acrylic paint Elite

Elite acrylic exterior paint

High quality acrylic paint for exterior use.

Resistant to adverse weather conditions.

Applicable on brick-walls, plaster, concrete etc. High coverage and adhesion.

Suggested primers: water or solvent based Tetradur primers by TETRALUX

Available in white and P, D and TR tinting bases.

Application Instructions

Stir well before use.
Surfaces must be clean, dry and free from contaminants.

New surfaces

1st coat: Prime using TETRADUR water or solvent based waterproof primer, with high penetration and adhesion.
2nd coat: one layer of Elite acrylic paint. thinned 5 – 10% with water.
3rd coat: one layer of Elite acrylic paint. thinned 5 – 10% with water.

Painted surfaces

Repair flaking parts where necessary and prime them using TETRADUR water or solvent based primer.
Re-coat twice using Elite acrylic paint thinned 5 – 10% with water.

Download Technical Specification Document from here

Material Safety Data Sheet is provided upon request. Apply here

Brush

Roller

Spray gun

Frequently asked questions

What is Elite Acryl used for?

Elite Acryl is a exterior acrylic paint designed for facades and exterior walls. Before application, make sure the surface is properly prepared and check the Technical Data Sheet or ask Tetralux technical support to choose the right system.

What is the coverage of Elite Acryl?

Elite Acryl covers 12 m²/l per coat. Actual consumption depends on the porosity, texture and preparation of the surface. For an accurate estimate, use the Tetralux paint calculator or ask our technical team.

How long does Elite Acryl take to dry?

Drying time is 1 hour at around 20-25°C and normal humidity. In cold or damp conditions it takes longer, so let the surface dry properly before applying the next coat or putting it into use.

How should Elite Acryl be thinned?

Recommended dilution: 5 - 10% with water. Stir the product well before and after thinning and do not exceed the suggested ratio, so that coverage, adhesion and the durability of the final film are not compromised.

Which tools are used to apply Elite Acryl?

Elite Acryl is applied with brush, roller and spray gun. Make sure the surface is clean, dry and sound before you start, and follow the Technical Data Sheet for the number of coats and the right primer.

Which pack sizes are available for Elite Acryl?

Elite Acryl is available in 750ml, 3l, 10l packs. You can find it at Tetralux stockists, and for professional quantities or technical support you can contact the company directly.