Epolux SP 541 Solvent Based Epoxy Pool Paint (renaming of Epolux 120)

• Stir well before use.
• EPOLUX SP 541 contains solvents.
• During application in enclosed areas good ventilation is required.
• Component B is completely added to A and mixed for at least 5 minutes until the mixture is completely homogenized.
• Apply with a brush, roller or pistol within 24 hours of applying the primer after it has dried.
• The second coat is applied after the first one has dried, but within 24 hours.
• Adhesion between the layers may be affected by the presence of moisture or dirt.
• If there is a waiting time between the consecutive layers longer than expected or if old surfaces are to be dyed again, the surface must be cleaned and ground thoroughly before the new application.
• The application temperature should not be below 10 ° C and the humidity should not exceed 75% RH.
• After application the surfaces must be protected from moisture for 6-8 hours as moisture can give white tinge on the surface and/or make it sticky.
• Once cured, EPOLUX SP 541 is harmless.

Surface preparation

• The quality of the concrete must be at least C20 / 25 with a cement content of 350 kg / m3, moisture content <4% and application must be carried out at least 30 days after the construction of the surface.
• TETRALUX, EPOPRIMER 240, epoxy primer thinned 10-15% in weight, or EPOLUX SP 541 thinned by 40-60% in weight, using Νο810 ΤΕΤRALUX solvent, is used for priming.