Epolux 540 Solvent Based Epoxy paint (renaming of Epolux 121)

• Stir well before use.
• EPOLUX 540 contains solvents.
• During application in enclosed areas good ventilation is required.
• Component B is completely added to A and mixed for at least 5 minutes until the mixture is completely homogenized.
• Apply with a brush, roller or pistol within 24 hours of applying the primer after it has dried.
• The second coat is applied after the first one has dried, but within 24 hours.
• Adhesion between the layers may be affected by the presence of moisture or dirt.
• If there is time between the consecutive layers longer than expected or if old surfaces are to be dyed again, the surface must be cleaned and rubbed together before the new application.
• Temperature should not be below 10°C and the humidity should not exceed 75% RH.
• After application the surfaces must be protected from moisture for 6-8 hours as moisture can give white tinge on the surface and/or make it sticky.
• After its hardness, EPOLUX 540 is harmless to health.

Cementitious substrates

• The quality of the concrete must be at least C20/25 with a cement content of 350kg/m3, moisture content <4% and application must be carried out at least 30 days after construction of the surface.
• The priming is done with the EPOPRIMER 240 of TETRALUX diluted 10-15% by weight or with EPOLUX 540 itself diluted 40-60 wt% with solvent No810 of Tetralux.

Metal surfaces

• Good surface cleaning is required and depending on the substrate brushing, sand blasting, milling, etc. are required.
• The priming is made with two-layers METALPOX 140 for better anti-corrosion protection.