Epoprimer 240 Epoxy Solvent Based Primer (renaming of Epolux 125)

• Stir well before use
• Surfaces must be clean, dry and free from foreign objects and substances.

Surface preparation

• The quality of the concrete must be at least C20 / 25 with a cement content of 350 kg / m3, moisture content <4% and application must be carried out at least 30 days after the construction of the surface.
• Good surface cleaning is required and brushing, sand blasting, milling, etc. are required depending on the surface.

Application

• EPOPRIMER 240 contains solvents.
• During application in enclosed areas good ventilation is required.
• Component B is completely added to A and mixed for at least 5 minutes until the mixture is completely homogenized.
• Dilute 5 – 20% with solvent Νο 810, depending on the absorbency of the substrate.
• Temperature should not be below 10°C and the humidity should not exceed 75% RH.
• Adhesion between the layers may be affected by the presence of moisture or dirt.
• Application of final coat of EPOLUX 540 must be done within 24 hours and after the primer has dried.
• If more than 24 hours have passed between priming and application of the final layer, the surface must be spread up with quartz sand in order to ensure good adhesion.
• EPOPRIMER 240 is harmless to health after its complete hardening.
• After application the surfaces must be protected from moisture for 6-8 hours as moisture can give white tinge on the surface and/or make it sticky.