Acrylic sports court paint Sportlux

Sportlux Sports floor paint

Acrylic paint for sports floors.

Suitable for tennis courts, multipurpose courts, as well as for cycle paths, sidewalks, squares and pedestrian areas.

It is a product of a balanced composition of acrylic water dispersion with suitable pigments, additives and selected aggregates.

It has easy application, very good adhesion and high elasticity.

It has high resistance to weather and abrasion under conditions of frequent use.

It protects against damage and prolongs the life of the substrate.

Application Instructions

Clean the surface from dust, oils, greasy substances and then wash it thoroughly with water under pressure.
After drying, apply a layer of TETRAPLAST primer diluted with water in a ratio of 1:3. For maintenance-repainting of surfaces priming is not necessary.
Dilute 15-20%v/v with water for the first layer and 10-20%v/v for the second.
Apply Sportlux in two cross layers.
To achieve an anti-slippery surface, mix the diluted product with Quartz sand at a rate of 10-25% w/w on the original quantity before dilution.

Download Technical Specification Document from here

Material Safety Data Sheet is provided upon request. Apply here

10 - 20% with Water

Frequently asked questions

What is Sportlux used for?

Sportlux is a acrylic sports court paint designed for tennis courts and sports floors. Before application, make sure the surface is properly prepared and check the Technical Data Sheet or ask Tetralux technical support to choose the right system.

What is the coverage of Sportlux?

Sportlux covers 0,25 – 0,35kg/m². Actual consumption depends on the porosity, texture and preparation of the surface. For an accurate estimate, use the Tetralux paint calculator or ask our technical team.

How long does Sportlux take to dry?

Drying time is 1 Hour at around 20-25°C and normal humidity. In cold or damp conditions it takes longer, so let the surface dry properly before applying the next coat or putting it into use.

How should Sportlux be thinned?

Recommended dilution: 10 - 20% with Water. Stir the product well before and after thinning and do not exceed the suggested ratio, so that coverage, adhesion and the durability of the final film are not compromised.

Which pack sizes are available for Sportlux?

Sportlux is available in 4kg, 12kg packs. You can find it at Tetralux stockists, and for professional quantities or technical support you can contact the company directly.