Tilelux Tetralux

Tilelux

TILELUX is a specially designed high quality satin water-based paint for wall tiles. Its composition and the use of the special STEPlus additive makes it unique for painting tile surfaces exposed to a particularly harsh and humid environment. It is characterized by excellent adhesion even on glossy tiles (>6Mpa) and by its excellent resistance to wet environments, to the use of shampoos, shower gels, classic cleaning products, anti-salt products, diluted bleach, white vinegar and hot-cold water alternation. It is a unique solution for bathroom and shower renovation.

Characteristics-Properties

• Easy application
• Excellent finish
• No primer needed
• Excellent adhesion
• Excellent resistance to wet environment
• Excellent resistance to cleaners, bath products, hot-cold water alternation

Application Instructions

Add the special STEPlus additive and stir well for about 5 minutes.

Dilution: 10-15% with water

Applicatrion: Apply TILELUX in two coats with a roller or brush. It is possible to apply a third coat depending on the shade and gloss of the surface.

Consumption: Approximately 12-14m²/l on properly prepared surfaces.

General notes:

For the maximum possible result, it is recommended to use the mixture of the paint with the special additive STEPlus within 10 days.
The product is applied in room temperature conditions, from 12°C to 25°C.
Optimum performance and adhesion of the product is achieved after 15-20 days from application. During this period, avoid direct impact, abrasion and surface cleaning.
To clean painted surfaces, use a mild detergent and a soft sponge.
Wash tools immediately after application with water and detergent (if necessary).