18kg, 25kg
Tetracryl Acrylic, Silicone, Water repellent Plaster
Acrylic, silicone, elastomeric, water repellent plaster ready to use.
Excellent adhesion to all masonry materials like concrete, plaster, plasterboard, cement board etc.
Does not crack, highly water repelling.
Its specially designed formulation prevents mold growth on the surface.
Does not require a paint over-coat and due to its high elasticity
it is an ideal final coat to building insulating facades.
- Stir well before use.
- Surfaces must be clean, dry and free from foreign objects and substances
- A coating of SOVADUR primer or TETRADUR water or solvent based primer (waterproof primers with high penetration sand adhesion) follows.
- After the primer dries, we stir well and apply using a stainless polished spatula or a plaster sprayer gun.
- While the plaster is still dump (approx. 15-20 min), we finish by using a plastic spatula.
- Not to be applied in temperatures below 10°C and above 35°C and in environment humidity over 80%.
Download Technical Specification Document from here
Material Safety Data Sheet is provided upon request. Apply here
Without dilution
Spatula
1,2 - 3,1 kg/m²
1 hour
Frequently asked questions
What is Tetracryl Silicone used for?
Tetracryl Silicone is a silicone acrylic plaster designed for water-repellent facades. Before application, make sure the surface is properly prepared and check the Technical Data Sheet or ask Tetralux technical support to choose the right system.
What is the coverage of Tetracryl Silicone?
Tetracryl Silicone covers 1,2 - 3,1 kg/m². Actual consumption depends on the porosity, texture and preparation of the surface. For an accurate estimate, use the Tetralux paint calculator or ask our technical team.
How long does Tetracryl Silicone take to dry?
Drying time is 1 hour at around 20-25°C and normal humidity. In cold or damp conditions it takes longer, so let the surface dry properly before applying the next coat or putting it into use.
How should Tetracryl Silicone be thinned?
Recommended dilution: Without dilution. Stir the product well before and after thinning and do not exceed the suggested ratio, so that coverage, adhesion and the durability of the final film are not compromised.
Which tools are used to apply Tetracryl Silicone?
Tetracryl Silicone is applied with trowel. Make sure the surface is clean, dry and sound before you start, and follow the Technical Data Sheet for the number of coats and the right primer.
Which pack sizes are available for Tetracryl Silicone?
Tetracryl Silicone is available in 18kg, 25kg packs. You can find it at Tetralux stockists, and for professional quantities or technical support you can contact the company directly.
Related products
Sign up to receive the latest updates on our products, events and news.
